PVB interlayer film

Automotive PVB interlayer

Willing® MotticaTMoffers PVB film for the glazing of automobiles and other means of transport. Windscreens and side windows manufactured with WILLING® MotticaTM exhibit exceptional standards of safety, long-term stability, visual appearance, and protection from noise and UV light. Automotive laminated safety glass with WILLING® MotticaTM has excellent light transmittance properties in conformity with all requirements of ECE R43 and ANSI Z26.1. The film is available in all standard colours and as a shade band product. WILLING® MotticaTM certified to ISO/TS 16949, DIN EN ISO 9001, DIN EN ISO 14001 and OHSAS 18001.

Laminated glass made with WILLING® MotticaTM PVB interlayer enhanced acoustic interlayer is lighter than traditional automotive glass. As a result, MotticaTM PVB interlayer enables automakers to reduce vehicle weight, helping them meet and exceed global environmental regulations such as the CO2 emissions standards in the Kyoto Protocol as well as the Economic Commission for Europe (ECE) and U.S. Corporate Average Fuel Economy (CAFE) standards.

Special properties of Automotive PVB film

  • High edge strength for outstanding long-term stability
  • Moisture-insensitive glass adhesion
  • Pronounced flow and hence lower reprocessing rate, plus outstanding visual quality of the final laminate
  • Easy edge trimming
  • Low odour formation
  • Very low electrostatic charging

WILLING® VG SC+ is a special sound protection film for automotive glazing. It has been optimized in order to largely exclude the frequencies and ambient noise arising in the moving vehicle. The film exploits the benefits of trilayer technology.

Despite its sound-absorbing properties, VG SC+ provides the same level of safety as standard PVB films for the exacting requirements of automotive glazing.

Specification & Color

Specification

  • Thickness: 0.030" / 0.76 mm
  • Length: 250 m
  • Maximal total width: 1680 m
  • Width of top color shaded: 10% - 30% of total width

Min & Max Widths Shade tinted

  • Maximum total width = 1680mm
  • Maximum standard shade width = 510mm overall
  • Maximum clear width = 1300mm
  • Minimum shade width = 75mm

Shade tinted for Automotive MotticaTM PVB film

Band color Blue Light green Bronze Gray Light blue Blue Light green
Photo
Base color Clear Clear Clear Clear Clear Light blue Light blue
Dominant wave length (nm) 485 500 590 490 480 485 500
Visible light transmittance rate(%) 7 32 34 35 34 7 32

Colored

Item Unit Conditions Results Test method
Specific gravity - 23°C 1.07 Weight-in-air/weight-in-water method
Refractive index 23°C 1.48 Abbe's refractometer
Thermal conductivity W × Em-1 ×K-1 23°C 0.196 Thermal constants analyzer
50°C 0.214
Specific heat KJ × kg-1 × K-1 20°C 1.9 Differential scanning calorimeter (DSC)
100°C 2.3
Bulk modulus K-1 20°C 6.4 × 10-4 Thermo mechanical analyzer (TMA)
Permittivity - 23°C / 50Hz 4.2 Dielectric loss automatic analyzer
23°C / 1MHz 3.1
*While data shown are measured value, Willing does not guarantee these values as our products quality.

Quietness greatly boosts car comfort, and how to reduce engine, road, and wind noise are major issues in vehicle design. Willing has focused on the fact that noise enters through the cars windows, leading to the successful development of the Mottica™ Sound Acoustic Film sound insulation interlayer film that dramatically increases sound insulation performance. This film is employed in cutting-edge and environmentally-friendly vehicles, as well as in a variety of other cars on the world‘s roads.

Application

Safety

Willing® SAF - Safety PVB interlayer is designing for safety in architectural glass, this laminated glass with Willing® SAF - Safety PVB interlayer ...

VIEW MORE

Hurricane & Storm force

As we known the severe and complex nature of hurricane winds creates special challenges for buildings, for architects who must handle ...

VIEW MORE

Security

Laminated glass with Willing® SEF - Security PVB interlayer can provide remarkable protection from forced entry, bomb blasts and ballistics.

VIEW MORE

Sound abatement

Noise is defined as any type of sound that is considered disturbing, annoying or painful. Ambient noise consists of a multitude of sounds of different frequencies and intensities.

VIEW MORE

Solar Absorbing

Ultraviolet light (UV) is a invisible light to the human’s eye, and is as vital as it is hazardous. While a certain degree of exposure is beneficial

VIEW MORE

Structural

Current architectural design trends are driving the increased use of glass in building design. As a result, architects and designers need glazing products

VIEW MORE